The new geophysical device and new SRB technology in the field of groundwater and underground artesian wells revealed
For all farmers, and workers in the field of water exploration, and exploration companies who search for water underground in the world We offer you today, the latest water detection techniques. The modern and newest device between all devices that detect underground water BR 700 PRO device is made and developed during the 10 years of research and experiments in BR System American factory This product is made to be the first device in the world and the best between all other devices. It was made in a professional ways and high quality and unique specifications which make it a sophisticated detector for underground water detecting. Through this device the user can navigate and locate water places in the area that we want to scan ,and we can identify the most powerful points in that area.
It has been provided with feature to know the depth of water in exact number, and appear on the screen and we can get knowledge about waterpower in details.
BR 700 PRO can distinguish between fresh, salt, and mineral water and in the case of the discovery of water immediately shows the water type on the screen if fresh or salty or mineral water
1. The device has a modern LCD screen provided with operating program (Software) that is modern and easy to use.
2. BR 700-Pro can detects to 700m as depth underground (From 1 cm up to 700 meters underground)
3. Specifies the location of the water completely and identify strongest point of water within an area of up to 1000m
4. Working to determine the waterpower which allowing the user to see if the discovered water is shallow water or heavy water
5. The device appears on the screen automatically and immediately type of discovered water fresh water -salt water -mineral water
6. Accurate and current property offers new positive service to many of the ranchers who own salt water in their farms, but they are looking to fresh water
7. Anyone can use this device with ease. Unlike many other devices that are difficult for some prospectors working on them easily
8. Provides the user a lot of effort and time and fatigue during the search can provide a full survey of the land to be scanned within a few minutes
9. Signals and accuracy of the device isn't affected at all by the rocky soil or sand or mud
10. The device is equipped with a fully electronic system to work without using any additional accessory
11. This machine is capable of working at temperatures ranging from 20 degrees below zero to 55 degrees Celsius
12. Works on 12-volt battery and operate for 12 hours
13. Light weight and ergonomic device
14. The device is made from high-quality and durability electronic plastics
15. Device's languages: English, French.
1. The main unit of the device installed on the top of the device
2. probes (4 metal probes)
3. cables to connect between probes (4 cables)
4. The main device battery 12-volt
5. Bag device installed inside all parts and components.
6. Device Charger
7. User's Manual
8. warranty for 3 years
9. Made in USA
The device works in SRB modern system that has been developed in America. And upgraded and updated idea with soil resistance measurement system which is working on sending waves and electric shocks in the ground, which measure all frequencies and soil resistance and analyze readings which appear finally on the LCD screen
The main processor of the device is equipped with electronic probe based on the detected frequency measurement, which in turn works on the verification of the discovered water quality and salinity and show the result on the screen
Search Options
The device is contain a main unit and the electrodes (4 metal probes) and cables connected to the signal,
All detected signals appear on the screen installed on the main unit of the device
First, we set probes in the soil surrounding four corners of the place to be anointed and connected in wires to main unit. After that we turn on the device and select type of search
The automatic search will make full scan of the area between four probes and we choose this option at the beginning of search to scan a large area we looking for water in them.
Then the device searches for water between all of these electrodes (probes) and after complete the research it shows the readings automatically on screen
Example: between the probe 1 to 2 There is water - water type: fresh - the depth is150 meters
Example: between the probe 2 to 3 There is water- water type: fresh- the depth is 150 meters
Example: between the probe 3 to 4 there is no water
Example: between the probe 1 to 4 there is no water
After results of search are appear we go to the place that has been confirmed water in it. And we do a manual search between two probes, only without the need for a full search for the four probes, and we make inventory through approximation of the probes to each other until the inventory of water will inside a smaller space and this small area is the best place to start digging and which has the strongest point of water.
Manual search is different from automatic search through the way of search For example: to start with manual search no need to use all probes and all you need is two probes to scan only small area .The manual search provides the ability to search only between two probes (for example)
Search between probe 1 and probe 2 only
Search between probe 2 and probe 3 only
Search between probe 4 and probe 1 only
This device is the most appropriate and the best choice for you to have accurate and guaranteed results for the detection of underground water and artesian wells
INR 842000.00
INR 667500.00
INR 595000.00
INR 636000.00
INR 30020.00
INR 278000.00
INR 441600.00
INR 750000.00
Mon-Fri: 9:00am - 9:00pm